Fitting a Cat Flap > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Installing a cat flap into your home could be a major step for any pet owner. If your cat is old and requires extra security, or you have new kittens that need to be vetted There are plenty of options there to choose from.

It can be intimidating for those who aren't professionals to put in an animal flap, but with the proper guidelines, it's easy. Planning, preparation and precision are the key to success.

Select the Right Door or Windows

There are a wide variety of cat flaps to choose from including some with locks (which can be used to prevent your pet from leaving or entering) and others with advanced features like microchip door entry systems. But, it's important to think about how easy your cat is to train to use the flap prior to making a buy and install one.

It is best to place the cat flap, depending on the style of your home, in a window that opens into an area of the garden that is protected. This will help your cat feel safe when entering or leaving your home. If you can, this will also give them a route back in should they be chased by another cat or by humans who are intent on harming them.

It is possible to install the cat flap on the case of a uPVC door or a glass window however it's not as easy as putting one in a wooden door. This is because uPVC or composite door cat flap doors come in different thicknesses. This can affect the how holes are cut and the type of door you can fix into.

If you're installing the flap on the glass of a door it is recommended that you find a glazier who is experienced in this type of work to avoid any costly errors. If you're installing the flap in a wooden door, start by introduction of your cat to it prior to fitting a Cat flap it so that they can get used to its size and shape and explore it from every angle.

Find out the size of your cat's belly

You'll need the measurements of your cat to make sure that the cat flap you put in is a perfect fit. This will ensure that the flap is the right height on your door or window and that it's large enough for them to enter and out easily.

Place your pet on its back and gently run your fingers along their belly. Check for any squishy fat pads - these might be visible around their lower back, face or legs. The padding helps protect your pet and allows it to move more freely, especially when performing feline circus skills.

You can also take into account the weight of your pet to determine how large an opening you require. If your cat weighs 5kg, for instance the suggested cat flap opening size is 14x12cm.

Measure Your Door or Window

This type of cat flap, as its name suggests is designed to be affixed to the door. It allows your pet to move in and out at their convenience. They are typically made of aluminum or plastic and rest in the middle of the door. They have an open door that opens by pushing lightly on either side. There are now locking versions of these flaps that offer additional security to ensure that your cat can't simply walk through from the outside.

Cat flaps are also commonly employed in windows. They can be easily installed, but they need to be set at a high level as cats and dogs have a difficult time to reach them. If the window is too high to be used as a cat flap then ramps, steps, or specially built stairs can be utilized to help the animal access it.

It is possible to install the cat flap onto a brickwall, but it is not recommended for people who are not experienced in masonry. This could cause the wall to weaken. Before you begin, it's essential to make sure that the wall is free of cables and pipes. If they are, an opening must be made for them. This is something you should always seek expert advice on. Wearing protective glasses or a dust mask will ensure that you don't breathe in the sawdust created when cutting into your walls.

Select the Right Cat Flap

There are a variety of cat flaps available and they all have different features. Some are equipped with security features like magnetic locks or microchips that stop unauthorized entry and prevent your pet from allowing friends or other animals into the house. Certain seals are weatherproof and have insulation to block out moisture and draughts.

There's also a variety of sizes based on the size and breed of your pet. Cat flaps can be found in rectangular shapes, while others are circular or square. The type of cat flap in bifold doors flap you pick will depend on the size of the opening and the type of window or door you're fixing it to.

Lastly, think about the mechanism to open your cat flap is likely to have. A simple aluminum or plastic swing-out door is an choice and is typically the least expensive. But, it will not keep other animals or cats from entering and you may be letting draughts in too.

It's time to put in your cat flap. Start by marking the height of the belly on the door using your ruler. Use a spirit level to make sure the line is not too low and is straight on the door. Use your spirit level to draw a template for the cat flap. Then, using a Jigsaw, cut the outline of the door. When you're happy with the result, sand the edges and then drill through the pencil lines to create holes for the screws.

Make sure you have the tools ready

Like all DIY tasks, it's best to have the right tools to complete the task. The most important things you'll require are the cat flap as well as a tape measure, an excellent pencil and a spirit level drill, file, and the Jigsaw (depending on your windows or doors).

If you're installing a composite door, it is recommended to consult with the manufacturer before making any changes because this could invalidate the warranty or break the weathertight seal. In this instance you'll likely need to fit an entirely new pane of toughened glass instead.

For wooden or Fitting a cat flap uPVC doors, you'll need to cut out the shape of your cat flap using a jigsaw and follow the instructions given by the manufacturer. If possible, you can use a template to help you mark out the size of hole you have to cut.

After you have cut the hole, you will have to sand off the edges of the opening. This will stop any rust or water damage from happening in the future. It is also recommended to seal the holes in your door or window and the back of the cat flap to block rain and wind. After the sealant has dried then you're now ready to put in your new cat flap!

Install the Flap

If you want your cat to come and go whenever it wants, installing flaps can be helpful. The majority of people can install the flap on their own. However when you plan to put it in a glass or uPVC type door, you may require a professional.

Look at the instructions included with the cat flap. There is a drawing of the template. This will give you an idea of the location where the holes will be drilled for the flap to be placed in the door. Note the areas you'll need to drill in with a pencil.

After you have marked the door on your door, you can use the jigsaw and cut out the shape for the cat flap. It is a relatively simple job, but you'll need to be comfortable using a jigsaw. Many companies will complete this work for you for a reasonable price in case you're hesitant to do it yourself.

Then, screw the inner part to the hole of your door. You may have to apply sealant prior to doing this to ensure it is weather and water resistant. You can then place the outer part of the cat flap on the top of the fixing bolts and then tighten the bolts all together. It is recommended to test the flap with your cat to make sure that it is working properly and that they can enter and leave easily through it.