See What Ghost Immobiliser Problems Tricks The Celebs Are Using > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions from theft by using the Ghost Immobiliser. This system is discrete and does not require any additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be altered up to 20 times. This will allow your vehicle to begin.

Simple process to change the PIN code

Many homeowners are upgrading their security due to the rise in vehicle theft. There are many types of security products that are available from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your vehicle. A tracking system may aid in finding your vehicle if it's stolen however it cannot stop the crime. Immobilisers, however are exactly what they say on the tin: they shut off your car's engine so that it can't be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your car.

Utilizing the buttons already in your car, the ghost 11 immobiliser device creates an unique sequence that must be entered before the engine will start. This can be done via the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This is especially beneficial if you have to hand your car over to a valet service or parking, as the immobiliser is activated and not disabled.

The ghost immobiliser tracker is an unique and innovative device that works with your vehicle's buttons rather than as a separate unit. It's not just an effective deterrent to vehicle theft, but it can be used to secure any future vehicles you own. This makes it a better investment than a traditional wheel lock.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a sophisticated security system that safeguards your pride & joy from key cloning and hacking. It also blocks ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be plugged into the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it works with all vehicles. It also is resistant to jamming devices, which are a common method used by car thieves to get around immobilisers.

The advantage of using CAN data is that it runs silently when compared to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology, nor can it be identified by conventional diagnostic tools. The autowatch ghost 2 immobiliser Ghost does not use LED indicators but instead utilizes buttons on your vehicle, such as the steering wheel, centre console or door panels, to create a unique sequences for disarming. You can make this sequence as long as 20 presses for added security. The iPhone app lets you make one, authorized connection, with the pairing code unique to the Ghost and communication between the two is encrypted.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It can be temporarily operated in valet or service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can offer your vehicle to valet or service without entering the code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that can be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to disable your car's system from going through its normal start-up routine until you input the passcode you have created. The system can be activated and deactivated by using your smartphone's application without the need for wires.

The standard factory immobilisers work by using a transponder that is embedded in the key. It transmits a message to the ECU. The car will start if the correct code is sent. However, if the transponder from another vehicle is used instead, the immobiliser doesn't recognise it. This enables the vehicle to be stolen and started. The ghost immobiliser problems (historydb.Date) immobiliser was developed by an South African company at the top of the line in vehicle security technology. It protects your pride and joy from key cloning, hacking and even key theft. The only way that a burglar could steal your car is by physically towing it away, and even then they would not be able to drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to generate a unique, changeable PIN code sequence that must be entered before you can drive. It does this without additional hardware, like a keyfob. It can take up 20 to 20 presses. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing techniques to determine if the system has been set up.

Ghost is harder to remove than car alarms that require disarming by pressing a series of buttons. This makes it a fantastic addition to an GPS tracking device that can be used to track your vehicle after it's stolen.

Override of emergency PIN code

You do not have to look far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle with your original keys.

Our Ghost immobiliser fights this and provides you with an additional layer of security to stop your vehicle from being stolen if it is targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel and the centre console. This unique PIN is entered alongside your original key fob to prevent the engine from getting started. The unique override pin can be located on a black card which you will receive following the installation. It is easy to remember because there aren't any LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected using diagnostic software that can determine what type of security systems you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Unlike most other security systems that use an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analogue immobiliser, alarm or tracker with these systems but this must be specified prior to installing the device. They are also compatible with service/valet modes and a great alternative to a tracking device if you take your car into the dealer for an electrical problem.

Service/Valet Mode

In recent times, there has been an increase in vehicles being stolen without the owners keys. It is easier than ever to steal your pride and joy with the availability of key cloning devices and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) through the data loop called CAN. It's completely quiet since it doesn't use radio frequency or a key fob. It isn't detected by diagnostics or any other hacking device. It also prevents the addition of the key to a new one or replacing the ECU to get around the system as only the correct PIN code will allow the engine to start.

The device is hidden within your car, using buttons on the steering wheel, centre console and door panels. A unique & changeable PIN code sequence that can be as long as 20 digits needs to be entered prior to being able to start your car.

This is the first aftermarket CAN-bus immobiliser for the market that is being developed. It will stop your vehicle from being driven or started if you don't enter a PIN number first. If the device is activated and you try to drive away, it will display an indicator on your dash, which will flash regularly for around 300m. If you enter your PIN code at this point it will disable the anti-hijack system and your vehicle will continue to operate just as normal. If you don't enter your PIN in this moment the indicator will continue to flash and require a new PIN code each time you attempt to start your vehicle.