See What Ghost Immobiliser Problems Tricks The Celebs Are Using > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions from theft by using the ghost Immobiliser problems Immobiliser. This system is discrete and doesn't require additional key fobs.

The device uses existing buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence that can be up to 20 presses. This then authorizes the start-up of your vehicle.

Simple PIN Code Change Process

With the rising rate of vehicle thefts, many owners are looking to improve their security. There are many types of security products that are available, from tracking systems to alarms and immobilisers. They're not all equally effective in protecting your car. A tracking system may aid in finding your vehicle in the event of it being stolen however it cannot prevent the crime. An immobiliser, on the other hand does exactly what it says on the tin: it disables the engine of your car to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves steal your car.

The ghost device uses the buttons on your car to generate a unique sequence that must be entered to allow the engine to begin. This can be accomplished using the indicator stalk or window buttons. Additionally it is possible to use an app on mobile that can function as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This is a great solution when you wish to donate your car to valet parking or maintenance. The immobiliser will remain active.

The Ghost is an innovative and unique device that works by using the buttons of your vehicle instead of as a standalone device. It is not only an effective deterrent for vehicle theft however, it can also be used on any future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Weatherproof tiny device

The Autowatch ghost immobiliser is an advanced security device that protects your vehicle from key cloning, hacking & ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without the need for extra wiring, and has been thoroughly tested to ensure it works with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to get around immobilisers.

The benefit of using CAN data is that it operates in a silent manner when compared to conventional systems. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by traditional diagnostic tools. The Autowatch ghost doesn't produce LED indicators and instead uses the buttons in your vehicle like the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can make this sequence as long as 20 presses to provide additional security. The iPhone app allows only one, authenticated connection, with a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.

The ghost 2 immobiliser cost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start only if the correct pin code is entered. It can be temporarily operated in Valet/Service mode (with the appropriate parameters, like 30mph speed limit) and, therefore, Ghost Immobiliser Problems you can give your car to an attendant or valet without entering a code.

Each vehicle is tested

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that is able to be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals to block your car's system from going through its normal initialization process until you enter a custom passcode. The system can be activated or deactivated by using your smartphone app, without the need for extra wires.

The standard factory immobilisers work by using a transponder that is built into the key. This transmits a signal to the ECU. The car will begin to start if the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle to be stolen and then started. The Ghost immobiliser has been developed by an South African company at the forefront of vehicle security systems technology. It safeguards your pride and joy from hacking, key cloning and even key theft. The only way that a burglar could steal your vehicle is physically towing it away and even then they wouldn't be capable of driving it.

Ghost uses the buttons in your vehicle including the indicator stalk as well as the steering wheel and door panels to create an individual, changeable PIN code sequence that must be entered prior to you can drive. This is not required to use additional hardware like key fobs and can last up to 20 presses long. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, which means thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if an installation has been made.

ghost immobiliser tracker is harder to remove than car alarms that require disarming with several buttons. This makes it an excellent complement to a GPS tracker which helps locate your vehicle after it has been taken.

Emergency PIN code override

You don't have to look far on social media to see stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices as well as hacking tools that allow them to start the car without the original keys.

Our ghost immobiliser cost immobiliser combats this and gives you an additional layer of security to prevent your vehicle from being taken if it is targeted by thieves. It works by creating a unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel, and the center console. This unique PIN has to be entered in conjunction with your original key fob to prevent the vehicle from getting started. The unique PIN for override is on the black card that you will receive following installation. It's easy to remember because there are no LED indications.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, which means it cannot be detected by modern criminals with diagnostic software that can identify the security system you have installed. This makes it a great alternative to a tracking device.

Unlike other security systems, which rely on a relay in the engine bays, immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This allows them to block a vehicle completely, by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems but this must be stated prior to the installation of the device. They are also service/valet mode-compatible and a good alternative to a tracker having your car in for repair at the dealers.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen from owners without keys. With the ease of access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to steal your joy and pride. We have developed the Autowatch Ghost Immobiliser to combat this. It blocks your car from being driven, even if your keys have been cloned.

It connects directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't use radio frequency or key fobs. It isn't detected by diagnostics or any other hacking device. It also stops you from adding an ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden inside your car and can be accessed by existing buttons on your steering wheel, Ghost Immobiliser Problems centre console, and door panels. Before you can start your vehicle, you must enter a unique, changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car from being started or driven away without a PIN code being entered prior to. If the device is armed and you try to drive off it will display an indicator on your dash that will flash on a regular basis for approximately 300m. If you type in your PIN code at this point it will disable the anti-hijack device and your car will continue to operate just as normal. If you don't enter your PIN at this point the indicator will continue to flash and will require a new pin code every time you attempt to start your vehicle.