A Guide To Subaru Car Keys From Start To Finish > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

The key subaru fob to be programmed by an auto locksmith or a Subaru dealer, depending on the age of your subaru key fobs is. This is done by connecting a computer programming machine to your car.

To program your Subaru, start by unlocking the driver's doors using the door button control and then shut it. You will hear a chime on the instrument panel, and the dome lights will flash.

Step 1: Find the Transmitter Circuit Board

There are a few different ways to program your key fob. First, you should determine what kind of key fob you have. This can be done by looking at the shape of your key fob or by listening to your car's sound.

Once you've got the information and have it, you can begin the process of programming your keyfob home. To accomplish this, you'll require a metal key and a screwdriver with a flat head. The key fob can be opened by twisting. Push the metal key into the case and then let go of the battery by pressing the tabs that hold it in place. Replace the battery and then put the case back together.

Step 2: Remove the key fob case

It is an ideal idea to change the batteries in key fobs in case they're not functioning. In some instances, the buttons on the key fob might be damaged. If you notice that the buttons' contacts made of metal have come loose You can try applying solder back to them in order to make them function again.

Before you begin the process, ensure your vehicle's doors are closed and the ignition is turned off. You can accomplish this by closing the driver's door and pressing the door button ten times in quick sequence. You should then hear the instrument panel chime, and your dome lights will flash. This indicates you're now ready to proceed.

Step 3. Insert the fob of your key into the ignition

There are a lot of websites online that can give you steps on How Much To Replace A Subaru Key Fob to program a replacement or new Subaru key fob at home, but the majority of them aren't particularly specific. Reprogramming a key that is electronic is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with the doors shut and the engine off. Use the door button to unlock all doors. Open and close the driver's door 2 times. After that, insert and remove your key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp if the settings are changed.

Step 4: Turn the Ignition On

It is essential to realize that this method of programming a key fob is effective if you have a functioning key. If you don't an auto-locksmith or a dealer will be required to program the key fob for your Subaru Fort Bliss.

Once your key is programmed you should be able start your car in around five minutes. Start by closing all doors and shutting off the engine. Then, sit in the driver's chair and unlock all doors using the door button control. Put the key into the ignition and turn it to the first position. The electrical systems will be activated, however, the engine remains off. Repeat this process ten times.

Step 5: Unlock the Door of the Driver's Door

Subaru provides a variety of premium cars equipped with key fobs that lock and unlock doors, start the car, and defrost the windows. These devices may stop working.

To resolve the issue, you should contact an expert locksmith or dealer. This will solve the issue and ensure your vehicle is safe.

First, you must open and close the driver's door. Then, you need to place the ignition key in and change it to the off position. Then, reverse it to the off position. Perform this as fast as you can, ten times. After the tenth repetition you will hear a chime.

Step 6: Press the Lock/Unlock Button on the Driver's Door

The procedure to replace a battery in the Subaru remote key fob is a breeze. First, open the external fob casing. Then then, use the flathead screwdriver open the inside of the case and take out the old battery.

After removing the battery, replace it with the new one and close the case. Then, get in the driver's chair and unlock all the doors with the door button control. Then, put the ignition key and turn it so that the electrical systems are powered on but the engine is off. Repeat this 10 times until you hear a chime sound on the instrument panel. This will put the system into programming mode.

Step 7: Press the Lock/Unlock Button on the Passenger's Door

The annoying chirp that can be heard when locking or unlocking a Subaru Key Fob from outside of the vehicle can be very distracting for some owners. In certain instances you can turn off the chirp by opening and shutting all doors while double-clicking lock button on your key fob.

Switch the ignition off and shut all doors as well as the lid for the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. Once this is completed, the instrument panel emits an audible chime. The chirp indicates that the door and fuel-filler lid are locked. The setting can also be changed so that the doors and lids for the fuel-filler are locked automatically, without pressing a request switch.

Step 8: Enter the 8-Digit Transmitter Number.

Write down the first sequence of 8 numbers and keep it in your wallet. Now, climb into the driver's chair, close the doors and turn the key in the first position. After 10 turns, your panel should chime once.

The circuit board for transmitters is within the key fob case. There will be two or three sets of numbers (8-digits) on the circuit board. Take note of the first sequence of numbers, and follow the steps in this guide to register the code with the system of your vehicle. For older models, this process may require a visit to the dealer.